PLEASE SELECT THE DESTINATION COUNTRY AND LANGUAGE :
카테고리 전체보기
상품명 | Rupert Neve Designs 542 Tape Emulator / 루퍼트니브 / 테이프 에뮬레이터 |
---|---|
브랜드 | Rupert Neve |
판매가 | 재고 문의 |
소비자가 | |
배송방법 | 택배 |
배송비 | 3,000원 (100,000원 이상 구매 시 무료) |
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
True Tape 에뮬레이션 회로를 통해 라운딩과 압축을 제공하는 PORTICO 500시리즈의 테이프 에뮬레이터입니다.
■가변 실크/텍스처 전자 회로망은 아웃풋 변압기에서 고조파 비율과 조성을 미세 조정
■고조파를 강조하는 Soft Clip 회로
■완벽한 양의 포화도를 혼합하기 위한 Wet/Dry 컨트롤 통합
Line Amp Specifications (Measurements with tape
circuit disengaged)
Noise: Measured at Main Output, un-weighted, 20Hz-22kHz, Input
Terminated 40 Ohms.
Unity Gain Better than -100dBu
Frequency Response
Measured at +10dBu, trim at unity.
Main Output +/- 0.25dB from 5Hz to 60KHz -2dB @ 120KHz
Maximum Output Level 23.25dBu
Total Harmonic Distortion and Noise
@ 1kHz, +20dBu output level Better than 0.0025% @ 20Hz, +20dBu
output level 0.07% Typical (2nd and 3rd harmonic)
Tape FX Specifications
insert spec description
Noise
Measured at Main Output, un-weighted, 20Hz-22kHz, Input
Terminated 40 Ohms.
Saturation @ minimum Better than -100dBu Saturation @ maximum
Better than -100dBu
Frequency Response
15 IPS, Input @ -0 dBu -3dBu @ 28kHz Saturation @ minimum 0dBu
@ 10Hz +5dBu Peak @ 60Hz
Saturation @ maximum -3dBu @ 20kHz -3dBu @ 12.5Hz +2.4dBu Peak
@ 60Hz
30 IPS, Input @ -0 dBu -3dBu @ 120kHz Saturation @ minimum -3dBu
@ 10Hz +3.15dBu Peak @ 125Hz
Saturation @ maximum -3dBu @ 100kHz -3dBu @ 12.5Hz
+1.3dBu Peak @ 110Hz
Total Harmonic Distortion and Noise
Refer to sweeps on page10 15 IPS, Input @ -0 dBu 0.4% @ 3kHz to 1%
@ 175Hz typical
Saturation @ minimum Greater than 1% below 175Hz typical
Saturation @ maximum 1% at 6kHz typical 0.3% @ 1kHz to 3%
@ 50Hz typical
30 IPS, Input @ -0 dBu 1% at 1kHz typical
Saturation @ minimum 0.6% @ 400Hz 5% @ 20Hz typical
Saturation @ maximum 1.5% @ 20kHz to 0.4% @ 1kHz typical 0.4%
@ 1kHz to 2 %@ 50Hz typical
Power requirements
Supplied by 500 series rack with 110-125 mA @ +/- 16V DC